Analog Devices: Acknowledged industry-wide as the world leader in data conversion and signal conditioning technology, Analog Devices serves over 60,000 customers, representing virtually all types of electronic equipment. Celebrating over 45 years as a leading global manufacturer of high-performance integrated circuits used in analogue and digital signal processing applications, Analog Devices is headquartered in Norwood, Massachusetts, with design and manufacturing facilities throughout the world.
Arrow and Analog Devices have a long-standing partnership to bring you the winning combination of support and technology. This is high-performance signal processing expertise made readily available to accelerate your design projects and to add significant differentiation to them. A deep and broad portfolio, with parts available in quantity and rapidly. Arrow as authorized Analog Devices distributor supplies the products necessary to meet your design needs.
Featured Product
ADL5511 - DC to 6GHz Envelope and TruPwr™ RMS Detector
The ADL5511 is an RF envelope and TruPwr™ rms detector. The envelope output voltage is presented as a voltage that is proportional to the envelope of the input signal. The rms output voltage is independent of the peak-to-average ratio of the input signal.
Read more
Other New Products From Analog Devices
|
|
News & Events
15.05.2012 - Analog Devices: 30V Auto-Zero, Rail-To-Rail Output Precision Amplifier
The ADA4638-1 is a high voltage, high precision, zero-drift amplifier featuring rail-to-rail output swing. It is guaranteed to operate from 4.5 V to 30 V single supply or ±2.25 V to ±15 V dual supplies while consuming less than 0.95 mA of supply current at ±5 V.
27.04.2012 - Analog Devices: Single Channel, 64-Position, I²C, ±8% Resistor Tolerance, Nonvolatile Digital Potentiometer
The AD5112 provides a nonvolatile solution for 64-position adjustment applications, offering guaranteed low resistor tolerance errors of ±8% and up to ±6 mA current density in the A, B, and W pins. The low resistor tolerance, low nominal temperature coefficient and high bandwidth simplify open-loop applications, as well as tolerance matching applications.
15.04.2012 - Analog Devices: ADSP-BF592 - Low Cost Blackfin with Optimized Peripheral Set
Low cost entry point into the Blackfin portfolio of processors.
02.04.2012 - Analog Devices: BeMicro SDK/SDP Interposer
Designed to be used as part of the customer evaluation and prototyping environment, this customized embedded processing solution is faster and more affordable than ever before.
01.04.2012 - Analog Devices: Dual 3 MHz, 1200mA Buck Regulator with Two 300 mA LDOs
The ADP5034 combines two high performance buck regulators and two low dropout (LDO) regulators in a small, 24-lead 4 mm × 4 mm LFCSP (QFN) to meet demanding performance and board space requirements.
23.03.2012 - Analog Devices: AD9608: 10-Bit, 125/105 MSPS, 1.8 V Dual Analog-to-Digital Converter
The AD9608 is a monolithic, dual-channel, 1.8 V supply, 10-bit, 105 MSPS/125 MSPS analog-to-digital converter (ADC) that features a high performance sample-and-hold circuit and an on-chip voltage reference.
08.03.2012 - Analog Devices: 30V, Micropower, Overvoltage Protection, RRIO Dual Op Amp
The ADA4096 operational amplifier features micropower operation and rail-to-rail input and output ranges.
17.02.2012 - Analog Devices: ADL5565 - 6 GHz Ultrahigh Dynamic Range Differential Amplifier
The ADL5565 is a high performance differential amplifier optimized for RF and IF applications. The amplifier offers low noise of 1.5 nV/√Hz and excellent distortion performance over a wide frequency range making it an ideal driver for high speed 8-bit to 16-bit analog-to-digital converters (ADCs).
31.01.2012 - Analog Devices: 8-Channel DAS with 18-Bit, Bipolar, Simultaneous Sampling ADC
The part contains analog input clamp protection, 2nd order anti-alias filter, track and hold amplifier, 18-bit charge redistribution successive approximation ADC, flexible digital filter, 2.5V reference and reference buffer and high speed serial and parallel interfaces.
09.01.2012 - Analog Devices: AD5755-1 - Quad Channel, 16-Bit, Serial Input, 4-20mA & Voltage Output DAC
Dynamic Power Control, HART Connectivity.
Arrow Multisolution Day
Arrow Iberia Electrónica is pleased to invite you to the second edition of Arrow Multisolution Day.
- Spain, Bilbao 19.06.2012 (09:00 - 18:00)
Customer Supplier Day 2012
We hereby would like to invite you to attend our Customer Supplier Day 2012. This exhibition and seminar day is organized in association with several suppliers.
- Houten 23.05.2012 (10:00 - 19:00)
Arrow Global Village 2012
Arrow invites all his customers to the third Arrow Global Village, which will take place in Helsinki on 24 May 2012.
- Finland: Helsinki 24.05.2012 (09:00 - 17:00)
New Products
| New Products | Analog Devices | ||
| Tue, 20 Mar 2012 12:04:38 GMT 2012-03-20T12:04:38Z ADE7816... | ||
| ADE7816, Six Current, One voltage Channel Energy Metering IC | ||
| 20/03 - 2012 | A/D Converters | |
| The ADE7816 is a highly accurate, multichannel metering device that is capable of measuring one voltage channel and up to six current channels. It measures line voltage and current and calculates active and reactive energy, as well as instantaneous rms voltage and current. The device incorporates seven sigma-delta (Σ-Δ) ADCs with a high accuracy energy measurement core. The six current input chann | ||
| ADUM7241, 1 kV Dual Channel Digital Isolators (1/1 channel directionality) | ||
| 7/05 - 2012 | Interface | |
| The ADuM7240/ADuM7241 are dual channel digital isolators based on the Analog Devices, Inc., iCoupler® technology. Combining high speed CMOS and monolithic air core transformer technologies, these isolation components provide outstanding performance characteristics superior to the alternatives, such as optocoupler devices and other integrated cou | ||
| ADUM4223, 5 KV rms Isolated Precision Half-Bridge Driver, 4 A Output | ||
| 7/05 - 2012 | Interface | |
| The ADuM3223/ADuM4223 are 4 A isolated, half-bridge gate drivers that employ the Analog Devices, Inc., iCoupler® technology to provide independent and isolated high-side and low-side outputs. The ADuM3223 provides 3000 V rms isolation in the narrow body, 16-lead SOIC package, while the ADuM4223 provides 5000 V rms isolation in the wide body, | ||
| ADP2164, 6.5V, 4 A, High Efficiency, Step-Down, DC-to-DC Regulator | ||
| 1/02 - 2012 | Power Management | |
| The ADP2164 is a 4 A, synchronous, step-down dc-to-dc regulator in a compact 4 mm × 4 mm LFCSP package. The regulator uses a
current mode, constant frequency pulse-width modulation (PWM) control scheme for excellent stability and transient response.
The input voltage range of the ADP2164 is 2.7 V to 6.5 V. The output voltage of the ADP2164 is adjustable from 0.6 V to the input voltage (VIN |
||
| ADN4695E, 3.3 V, 100 Mbps, Full-Duplex, High Speed M-LVDS Transceiver with Type 2 Receiver | ||
| 28/03 - 2012 | Interface | |
| The ADN4690E/ADN4692E/ADN4694E/ADN4695E are multipoint, low voltage differential signaling (M-LVDS) transceivers (driver and receiver pairs) that can operate at up to 100 Mbps (50 MHz). Slew rate control is implemented on the driver outputs. The receivers detect the bus state with a differential input of as little as 50 mV over a common-mode voltage range of −1 V to +3.4 V. ESD protection of up to | ||
| ADN4697E, 3.3 V, 200 Mbps, Full-Duplex, High Speed M-LVDS Transceiver with Type 2 Receiver | ||
| 13/12 - 2011 | Interface | |
| The ADN4696E/ADN4697E are multipoint low-voltage differential signalling (M-LVDS) transceivers (driver and receiver pairs) that can operate at up to 200 Mbps (100 MHz). The receivers detect the bus state with a differential input of as little as 50 mV over a common-mode voltage range of -1 V to 3.4 V. ESD protection of up to ±15 kV is implemented on the bus pins.
The parts adhere to the TIA |
||
| ADR4525, Ultra-Low-Noise, High-Accuracy 2.5V Voltage Reference | ||
| 27/04 - 2012 | Special Linear Functions | |
| The ADR45xx series of devices are high precision, low power, low noise voltage references, featuring ± 0.02% maximum initial error, excellent temperature stability and low output noise.
This family of voltage references employs a new core topology for high accuracy, while offering industry-leading temperature stability and noise performance. The devices’ low thermally induced output voltag |
||
| ADSP-BF609, Blackfin Dual-Core Processor up to 1GHz with Hardware Support for HD Video Analytics | ||
| 14/03 - 2012 | Processors and DSP | |
| The ADSP-BF609 Blackfin processor is optimized for embedded vision and video analytics applications using a dual-core fixed-point DSP processor with a unique pipelined vision processor (PVP). The PVP is a set of functional blocks next to the Blackfin cores designed to accelerate image processing algorithms and reduce overall bandwidth requirements.
Other features include a high performanc |
||
| ADUM7240, 1 kV Dual Channel Digital Isolators (2/0 channel directionality) | ||
| 7/05 - 2012 | Interface | |
| The ADuM7240/ADuM7241 are dual channel digital isolators based on the Analog Devices, Inc., iCoupler® technology. Combining high speed CMOS and monolithic air core transformer technologies, these isolation components provide outstanding performance characteristics superior to the alternatives, such as optocoupler devices and other integrated co | ||
| ADR4540, Ultra-Low-Noise, High-Accuracy 4.096V Voltage Reference | ||
| 27/04 - 2012 | Special Linear Functions | |
| The ADR45xx series of devices are high precision, low power, low noise voltage references, featuring ± 0.02% maximum initial error, excellent temperature stability and low output noise.
This family of voltage references employs a new core topology for high accuracy, while offering industry-leading temperature stability and noise performance. The devices’ low thermally induced output voltag |
||
Evaluation Boards
AD9467: 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter | |
| AD9467-200EBZ AD9467-250EBZ | $300 $300 |
| AD9286: 8-Bit, 500 MSPS, 1.8 V Analog-to-Digital Converter (ADC) | |
| AD9286-500EBZ | $300 |
| AD9266: 16-Bit, 20/40/65/80 MSPS, 1.8 V Analog-to-Digital Converter | |
| AD9266-20EBZ AD9266-40EBZ AD9266-65EBZ AD9266-80EBZ | $200 $200 $200 $200 |
| AD7298: 8-Channel, 1MSPS, 12-Bit SAR ADC with Temperature Sensor | |
| AD7298SDZ EVAL-SDP-CB1Z | $130.55 $99.00 |
| ADP1850: Wide Range Input, Dual/Two-Phase, DC-to-DC Synchronous Buck Controller | |
| ADP1850DP-EVALZ ADP1850SP-EVALZ | $60 $60 |
| ADIS16334: Low-profile Six Degree of Freedom Inertial Sensor | |
| ADIS16334/PCBZ | $610 |
Reference Circuits
Circuits from the Lab™ reference circuits are subsystem-level building blocks, engineered and tested for quick and easy system integration, to help solve today's analog, mixed-signal, and RF design challenges.
ADI engineers test and document their work in order to provide circuit notes, design files, and in some cases, device drivers and evaluation hardware.
Find more circuits at: www.analog.com/circuits
| Featured Circuits | |
 | Precision, Low Power, Single-Supply, Fully Integrated Differential ADC Driver for Industrial-Level Signals (CN0180) |
| Available Hardware | |
 | Fully Programmable Universal Analog Front End for Process Control Applications (CN0209) AD8475-EVALZ $20.98 |
| Available Hardware | |
 | Crest Factor, Peak, and RMS RF Power Measurement Circuit Optimized for High Speed, Low Power, and Single 3.3 V Supply (CN0187) |
EPC
ADI EPC
For the Processor Module of the Arrow EPC, the Blackfin ADSP-BF527 perfectly matches the demand for a system solution approach, designed for a bandwidth of data intensive applications, such as multimedia and surveillance, and also process control, industrial, medical applications, and many others.
The Analog Devices DC/DC board I is a power supply for the baseboard of the EPC.
You will find more information at http://www.embedded-platform.com
